£1,899.91 exc VAT
Qty

2000 LITRE SECTIONAL WATER TANK, INTERNALLY FLANGED BASE (IFB)
2000 Litre Nominal capacity GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated or None insulated available , Kiwa REG4 & WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by fully trained engineers for an additional cost.
IFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab.
IFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and/or 350 mm above any raised float valve housing.

Optional Extras:
• Float valves
• Screened overflow ¾'' (22 mm) up to 4"
• Screened warning pipe ¾'' (22 mm)
• BSP female tank connector 0.5" up to 2"
• Purewater aftercare service

Important: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates.
An Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.
Applications where there is sufficient working room all around the tank.
Comprising: Internally flanged base, externally flanged sides, internally flanged roof.
Insulated to the sides and cover only.

Specification
• Insulation: 50mm Fully Encapsulated to Sides
• Panel Size: 1000 x 1000/1500/2000mm high
• Side Panels: Externally Flanged
• Base Panels: Internally Flanged
• Heavy Duty Lid: Internally Flanged
• Internal fixings: Stainless Steel - 316
• External fixings: Galvanised
• Man way: Included, providing 800 x 800 mm access opening
• Galvanised foundation Levelling Steels: Included (To suit flat structural foundation pad)

PW.1x1x2.IFB Dimensions
Air Gap - AG
Available in Single or twin compartment (Divided) - Single
External Dimensions - 1150x1150x2207mm high high
Assembly area required -2150x2150x2707mm high high

Does your water tank need a clean?
Water can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.
For more information regarding this service, please see - Does your water tank need a clean?

Annual Disinfection Information and Options
• 6 month inspections of water storage tank
• 6 & 12 month clean and chlorination of water storage tank
• TVC and Legionella sampling
• Tank upgrade works available, bringing the old tanks up to current regulations
• Full tank replacement works available
• Legionella risk assessments including schematic drawings if required
• Microbiology analysis - water sampling via UKAS approved laboratories
• Building flush and mains injection
• Replacement of hollow roof struts.

Supply only lead time 1-5 days

Supply and installation lead time
2 weeks for delivery
3 weeks for assembly

Typical assembly time is 1 day (please see the SECTIONAL TANK PRE-INSTALL HELP GUIDE)

All our GRP Sectional tanks are as standard delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.
If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery

Standard delivery charges cover mainland UK but exclude the following postcodes below:
AB, CA, CT, DD, DG, EH, FK, G, IV, IM, KA, KW, KY, LD, LL, ML, PA, PH, PO Isle of Wight, SA, SY, TD, TN, TR and Scottish Highlands.

Products can be collected from our works.

Looking to avoid Shipping Charges? You can collect our products. All our tanks are available for collection "ex works", our suppliers are based all over the UK - please call if you wish to collect.

Next-day delivery available
On selected products ordered before 12pm

Technical advice available
Call our team now: 0121 323 4000

Nationwide coverage