THE PUREWATER RANGE OF HOT PRESS MOULDED GRP SECTIONAL WATER STORAGE TANKS

       Panel Specification

• Panels are manufactured from high quality SMC material hot pressed moulded to a temperature of 150°c. ensuring maximum dimensional stability.
• Panels are available in a metric format, panels being 1000 x 1000mm, 1000 x 500mm & 500 x 500mm.
• Individual panels are dimensionally accurate with defined sharp corners, and are precision factory drilled.
• Truncated panel option for maximum strength and to provide full metre span base configuration.
• Factory Pre-insulated using 25mm CFC free polyurethane foam. 
• Fully WRAS approved.
• Maximum size Manway access panel with 830 x 830mm aperture.
• Purpose designed one-piece raised float valve housing panel complete with screened spill over weir to ensure AB type air gap configuration.

      Access Man-way

• The Purewater man-way has a considerable 830 x 830mm access aperture. This ensures maximum space for ease of movement, and provides the largest access hatch available in the industry.

      Raised Float Valve Housings

• Purewater sectional tanks are supplied with a one-piece Raised Float Valve Housing panel which forms part of the roof structure in the same way as a standard roof panel. The inspection hatch opening is again a considerable 890 x 890mm offering the same access benefits as the standard man-way.
• As an option for use when height restrictions in the plant room are a factor, Purewater supply raised float valve housings with a side access facility, ensuring easy access to the float valve without having to work above the highest point of the tank.
• All float valve housings are supplied complete with screened spill over weirs to ensure AB air gap compliance. All Purewater spill over weirs are shrouded to prevent light ingress, thus preventing the growth of algae and similar organisms.

      Fixings

• All internal fixings are A4 grade stainless steel, external fixings are either galvanised or A4 grade stainless steel.

      Bracing System

• Bracing where required is provided by high grade box section steel uprights located at each vertical panel joint. Uprights are fixed using threaded stainless steel tie rods and further secured with angle brackets to the outside of the tank. All external steel components are hot dip galvanised.
• Our unique bracing system allows for maximum unobstructed movement within the tank, the system also providing unequalled simplicity for future cleaning operations.
• For tanks with internal divisions, Purewater use stainless steel for all uprights and associated reinforcement to divider panels throughout.

     Tank assembly

• Assembly of Purewater Sectional tanks is carried out by our own high skilled engineers. A full base inspection is undertaken before assembly can commence. Specification calls for exacting tolerances therefore laser level equipment is used, ensuring precision and accuracy from the start.
• Our engineers can fit all necessary float valves, connections and other ancillary items to the tank. Purewater will accurately install float valves ensuring correct positioning of the valve in relation to overflows and spill over screen units, thus ensuring correct AB air gap configuration.
• Purewater guarantee to work safely, efficiently and with respect to other site workers. Our engineers will remove all related packaging and similar waste items, ensuring a clean area when the job is completed. 

EASY - READ TANK CAPACITY CHART
Length X Width  (Metres)	1m Deep	1.5m Deep	2m Deep	2.5m Deep	3m Deep
1 x 1	1000 litres	1500 litres	2000 litres	2500 litres	3000 litres
1.5 x 1	1500 litres	2250 litres	3000 litres	3750 litres	4500 litres
2 x 1	2000 litres	3000 litres	4000 litres	5000 litres	6000 litres
2.5 x 1	2500 litres	3750 litres	5000 litres	6250 litres	7500 litres
3 x 1	3000 litres	4500 litres	6000 litres	7500 litres	9000 litres
4 x 1	4000 litres	6000 litres	8000 litres	10,000 litres	12,000 litres
5 x 1	5000 litres	7500 litres	10,000 litres	12,500 litres	15,000 litres
2 x 2	4000 litres	6000 litres	8000 litres	10,000 litres	12,000 litres
2.5 x 2	5000 litres	7500 litres	10,000 litres	12,500 litres	15,000 litres
3 x 2	6000 litres	9000 litres	12,000 litres	15,000 litres	18,000 litres
4 x 2	8000 litres	12,000 litres	16,000 litres	20,000 litres	32,000 litres
5 x 2	10,000 litres	15,000 litres	20,000 litres	25,000 litres	30,000 litres
3 x 3	9000 litres	13,500 litres	18,000 litres	22,500 litres	27,000 litres
4 x 3	12,000 litres	18,000 litres	24,000 litres	30,000 litres	36,000 litres
5 x 3	15,000 litres	22,500 litres	30,000 litres	37,500 litres	45,000 litres
4 x 4	16,000 litres	24,000 litres	32,000 litres	40,000 litres	48,000 litres
5 x 4	20,000 litres	30,000 litres	40,000 litres	50,000 litres	60,000 litres
5 x 5	25,000 litres	37,500 litres	50,000 litres	62,500 litres	75,000 litres
6 x 5	30,000 litres	45,000 litres	60,000 litres	75,000 litres	90,000 litres
7 x 5	35,000 litres	52,500 litres	70,000 litres	87,500 litres	105,000 litres
8 x 5	40,000 litres	60,000 litres	80,000 litres	100,000 litres	120,000 litres
6 x 6	36,000 litres	54,000 litres	72,000 litres	90,000 litres	108,000 litres
7 x 6	42,000 litres	63,000 litres	84,000 litres	105,000 litres	126,000 litres
8 x 6	48,000 litres	72,000 litres	96,000 litres	120,000 litres	144,000 litres
9 x 6	54,000 litres	81,000 litres	108,000 litres	135,000 litres	162,000 litres
10 x 6	60,000 litres	90,000 litres	120,000 litres	150,000 litres	180,000 litres
7 x 7	49,000 litres	73,500 litres	98,000 litres	122,500 litres	147,000 litres
8 x 7	56,000 litres	84,000 litres	112,00 litres	140,000 litres	168,000 litres
9 x 7	63,000 litres	94,500 litres	126,000 litres	157,500 litres	189,000 litres
10 x 7	70,000 litres	105,000 litres	140,000 litres	175,000 litres	210,000 litres
8 x 8	64,000 litres	96,000 litres	128,000 litres	160,000 litres	192,000 litres
9 x 8	72,000 litres	108,000 litres	144,000 litres	180,000 litres	216,000 litres
10 x 8	80,000 litres	120,000 litres	160,000 litres	200,000 litres	240,000 litres